How to read your meter

The SRP meter at your home monitors your daily power usage. Beneath are explanations of how to read each type of meter for our Bones, Time-of-Twenty-four hour period, Customer Generation and Electric Vehicle (EV) price plan options.

Meters

Landis + Gyr

You can read this meter using the LCD brandish on the meter itself.

To read your kW demand, wait for the meter LCD brandish to cycle to code 10. The code is displayed in expanse three – meet legend. Your maximum kW for the day will be displayed; this is the maximum average load over a 15 or thirty-infinitesimal interval, depending on your price program, for the solar day.

If you'd like to view historical daily reads for this meter, you may exercise and then online using My Account.

Landis + Gyr solar meter

The Landis + Gyr meter also works for homes with a solar electrical organization. Indicators at the bottom of the readout show the flow of electricity.

Elster Rex meters

Legend

Elster REX meters include the REX1, REX2 and REX2 solar meters.

Metered quantities: REX meters can brandish both energy and demand values. Energy values may exist displayed with five digits. If the quantity requires fewer digits, leading zeros are used. If TOU metering is being used, the meters can brandish the energy quantity for each rate. The charge per unit identifier shows the advisable charge per unit for each quantity.

Please refer to the images below to view sample displays that REX meters will cycle through. The codes and corresponding descriptions are as follows:

REX1

This meter tin can be read using the LCD on the meter itself.

If you'd similar to view historical daily reads for this meter, you may do so online using My Business relationship.

REX2

This meter can be read using the LCD on the meter itself.

If you'd similar to view historical daily reads for this meter, yous may practice so online using My Account.

Elster A3T meter

This meter tin can be read using the LCD on the meter itself.

If you'd similar to view historical daily reads for this meter, you may practice so online using My Account.

Dorsum to superlative

Regresar al principio

Mechanical meters

SRP uses the following mechanical meters.

Older analog meters

Digital:
The digital meter displays numbers in four or five windows. If you accept this meter, you merely tape the numbers (for instance, in Effigy i, your reading would exist 8304).

Punch:
Near SRP meters are punch-type meters that have iv or five clock-like faces numbered in clockwise and counterclockwise directions (run into Figure 2.). For these meters, you need to read the dials from correct to left, according to the direction of the arrow. Follow these guidelines when reading the dials:

  • If the pointer is between ii numbers, record the lowest number. (Unless information technology is 9 and 0, so you should record the 9.)
  • If the pointer is directly on a number, wait at the dial to the right. If the pointer is between 9 and 0, record the smaller number. If it is between 0 and ane, record the larger number.
  • To calculate usage, read the numbers you recorded for each dial from left to right (our example reading would be 9079). To make up one's mind how many kilowatt-hours (kWh) you take used, subtract the previous reading from the current reading and multiply the departure by the meter multiplier, which can be found on your meter.

If you take any questions about your meter, please call an SRP Customer Service Representative at (602) 236-8888.

Back to top

Regresar al principio

Damaged meters

About meter problems are the consequence of vandalism, tampering, or an accident. If the protective drinking glass embrace or the seals on the meter are broken, information technology may not operate properly. Don't try to adjust or repair the meter. Instead, phone call a Client Service Representative at (602) 236-8888.

Back to top

Regresar al principio